top of page

Retail and Pre-oil options available (ask about precoating your timber in WOCA).

 

WOCA Exterior Wood Oil (Bio-Based) for treatment and maintenance of new and previously oiled wood surfaces such as decks, garden furniture, exterior timber cladding etc. The special water-based composition of oil components ensures that the product is water-dilutable and friendly to the environment. The oil enhances the natural colour and grain of wood.

 

Features

  • Water-based oil for outdoor timber

  • Provides a strong water and dirt-repellent surface

  • Enhances the natural colour and grain of the wood

  • Contains UV filter and protects the wood from deterioration

  • Thick viscosity - no dripping - easy to use

  • Provides an open-porred, breathable surface

  • Fast-drying

  • Available in 14 colours in New Zealand

 

Instructions for use

Always remember to test on a less visible spot to check the compatibility of the surface with the product.

  • Clean new wood surfaces as well as old surfaces with Exterior Wood Cleaner before starting the oil treatment.

  • Then leave the wood to dry for at least 24 hours so that the humidity is not above 17%. Sand down any rough wood fibres with sandpaper,120-150 .

  • Make the application in dry weather only, min. 13°C. Avoid direct sunlight and high temperatures.

  • Stir the Oil carefully before and during use. Container with different batch numbers should be mixed before use to avoid differences in shade and gloss.

  • Apply an even and thin coat of oil with a brush or WOCA Oil Applicator. Treat the end grain wood first. The wet oil may have a white shade. When the water has evaporated after a few minutes, the wood will appear oiled.

  • Wipe off any excess oil with clean cotton cloth after no more than 5 minutes. Take particular care of removing excess oil from joints and grooves.

  • If the surface does not appear saturated with oil, repeat steps 5 and 6.

  • When the wood is dry, it may be polished with a polishing pad or polishing machine to ensure an extra hard-wearing surface.

  • It takes 24-48 hours at 20°C for the oil to harden thoroughly, depending on weather conditions and outdoor temperature. The wood must not be exposed to water during this period.

 

Please use WOCA Exterior Wood primer on wood that has not been pressure-impregnated. When applied around swimming pools and in areas where chemical is used, it may be necessary to re-oil more frequently.

WOCA - Exterior Wood Oil

$0.00Price
    bottom of page